Hardware Setup

From MuonPi-Wiki
Revision as of 08:34, 4 December 2020 by Hgz (talk | contribs) (Created page with "The MuonPi HAT board is a plug-on board for Raspberry-Pi minicomputers exhibiting a 40-pin GPIO-connector. Only place the board on the RPi with power disconnected. Use 13 mm l...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The MuonPi HAT board is a plug-on board for Raspberry-Pi minicomputers exhibiting a 40-pin GPIO-connector. Only place the board on the RPi with power disconnected. Use 13 mm long plastic spacers and 2.5mm metric screws to fix the board.

Retrieved from ‘https://wiki.muonpi.org/index.php?title=Hardware_Setup&oldid=452’