Hardware Setup

From MuonPi-Wiki
Revision as of 09:23, 4 December 2020 by Hgz (talk | contribs)
Jump to navigation Jump to search

The MuonPi HAT board is a plug-on board for Raspberry-Pi minicomputers exhibiting a 40-pin GPIO-connector. Only place the board on the RPi with power disconnected. Use 13 mm long plastic spacers and 2.5mm metric screws to fix the board.

Cable Connections

Hardware connections between MuonPi HAT board and detector
Retrieved from ‘https://wiki.muonpi.org/index.php?title=Hardware_Setup&oldid=455’