Difference between revisions of "Main Page"

From MuonPi-Wiki
Jump to navigation Jump to search
Line 21: Line 21:
  
 
=== SiPM PCB ===
 
=== SiPM PCB ===
The SiPM photo sensor which detects the dim light generated inside the scintillation detector is mounted on a small [[SiPM_board|SiPM board]]. Different numbers of SiPMs and read-out configurations can be realized through its flexible design.
+
The SiPM photo sensor which detects the dim light generated inside the scintillation detector is mounted on a small [[Sipm_board|SiPM board]]. Different numbers of SiPMs and read-out configurations can be realized through its flexible design.
  
 
=== Preamplifier ===
 
=== Preamplifier ===

Revision as of 15:57, 23 June 2020

The MuonPi Cosmic Detector Project

The MuonPi Project is a RaspberryPi-based system using an inexpensive plastic scintillator + SiPM photo sensor to detect muons from cosmic air showers with a time-stamping accuracy of several tens of nanoseconds utilizing the u-blox NEO-M8N GNSS module's "timemark" feature.

Learn about cosmic radiation

Learn about the detectors

The Hardware

SiPM PCB

The SiPM photo sensor which detects the dim light generated inside the scintillation detector is mounted on a small SiPM board. Different numbers of SiPMs and read-out configurations can be realized through its flexible design.

Preamplifier

The preamplifier is located in close vicinity to the SiPM photodetector board and amplifies the weak signals for transmission to the MuonPi board, where they are further processed and evaluated.

The MuonPi-Board

The main signal processing, voltage generation and parameter monitoring and adjustment is done on the Raspberry Pi plug-on MuonPi Board.

The Software

How to set up a MuonPi Raspberry Pi Setup

Admin Area

Useful resources for admins.

Related Articles

News and articles about cosmic rays and similar projects.

Other languages

About this Wiki


Sandbox page for testing/playing :